Filter
Top Products
49
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch
STP Instance Settings
The following window displays MSTIs currently set on the Switch.To view the following table,click Configuration > Spanning Tree > STP Instance
Settings
:
Figure 6- 30.STP Instance Settings
The following information is displayed:
Parameter Description
Instance Type Displays the instance type(s) currently configured on the Switch.Each instance type is classified by a MSTI ID.
CIST refers to the default MSTI configuration set on the Switch.
Instance Status Displays the current status of the corresponding MSTI ID.
Instance Priority Displays the priority of the corresponding MSTI ID.The lowest priority will be the root bridge.
Priority Click the Modify button to change the priority of the MSTI.This will open the Instance ID Settings window to
configure.The Type field in this window will be permanently set to Set Priority Only. Enter the new priority in
the Priority field and click Apply to implement the new priority setting.
Click
Apply to implement changes made.
Clicking the hyperlinked name will allow the user to view the current parameters set for the MSTI Instance.
Figure 6- 31.STP Instance Operational Status – CIST