Filter
Top Products
Figure 9- 23.Authenticator State – MAC Based 802.1X
This window displays the
Authenticator State for individual ports on a selected device.To select unit within the switch stack,use the pull-down menu at the
top of the window and click
Apply.A polling interval between 1 and 60 seconds can be set using the drop-down menu at the top of the window and clicking
OK.
The information on this window is described as follows:
Parameter Description
A
uth P
AE State
The A
uthenticator P
AE State
value can be:Initializ
e
,Disconnected,Connecting, Authenticating,Authenticated,
Aborting,Held,Force_Auth,Force_Unauth,orN/A.N/A (Not Available) indicates that the port's authenticator
ca
pability is disabled.
Back
end State
The Back
end A
uthentication State
can be Request,Response,Success, F
ail
,Timeout,Idle, Initializ
e
,
or
N/A.
N/A (Not Available) indicates that the port's authenticator capability is disabled.
Port Status Controlled Port Status can be Authorized,Unauthorized,or N/A.
MA
C Addr
ess
Displa
ys the MA
C address of the Authenticator. Up to 16 MAC address can be implemented for MAC based
802.1x.
A
uthenticator Statistics
This table contains the statistics objects for the Authenticator PAE associated with each port.An entry appears in this table for each port that supports the
Authenticator function.To view the Authenticator Statistics,click
Monitoring > Port Access Control > Authenticator Statistics.
172
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch