Filter
Top Products
Figure 6- 66.Access Rule Display window (IP)
To configure the
Access Rule for Ethernet,open the Access Profile Table and click Modify for an Ethernet entry.This will open the following screen:
Figure 6- 67.Access Rule Table
To remove a previously created rule,select it and click the
✘ button.To add a new Access Rule,click the Add button:
Figure 6- 68.Access Rule Configuration window – Ethernet
To set the Access Rule for Ethernet,adjust the following parameters and click
Apply.
81
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch