Filter
Top Products
Browse DVMRP Routing Next Hop Table
The DVMRP Routing Next Hop Table contains information regarding the next-hop for forwarding multicast packets on outgoing interfaces.Each entry in
the
DVMRP Routing Next Hop Table refers to the next-hop of a specific source to a specific multicast group address.This table is found in the
Monitoring menu under DVMRP Monitoring,with the heading Browse DVMRP Routing Next Hop Table.To search this table,enter either an
Interface Name or Source IP Address into the respective field and click the Find button.The next hop of that DVMRP Routing entry will appear in the
DVMRP Routing Next Hop Table below.
Figure 9- 39.DVMRP Routing Next Hop Table
PIM Monitoring
Multicast routers use Protocol Independent Multicast (PIM) to determine which other multicast routers should receive multicast packets.To find out
more information concerning PIM and its configuration on the Switch,see the IP Multicasting chapter of Chapter 6,
Configuration.
PIM Neighbor Address Table
The PIM Neighbor Address Table contains information regarding each of a router’s PIM neighbors.This screen may be found in the Monitoring folder
under the heading
PIM Monitor.To search this table,enter either an Interface Name or Neighbor Address into the respective field and click the Find
button.PIM neighbors of that entry will appear in the PIM Neighbor Table below.
Figur
e 9- 40.
PIM Neighbor
Table
183
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch