Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
103
Configuring the RADIUS server. You must configure your RADIUS
server to work with the Rack PDU. The following example shows how to
configure a RADIUS server for use with a Rack PDU. APC supports
authentication and authorization of users by various RADIUS servers and
does not recommend a specific RADIUS server.
1. Add the IP address of the Rack PDU to the RADIUS server client list
(file).
2. The users must be configured with a Service-Type attribute. If no
Service-Type attribute is configured, the user will have read-only
access (on the Web interface only). There are two acceptable values
for Service-Type: Administrative-User (6), which gives the user
Administrator permissions, or Login-User (1), which gives the user
Device Manager permissions.
The following examples may differ somewhat from the required
content or format of your specific RADIUS server.
Example: (RADIUS users file)
See also
See your RADIUS server documentation for information
about the RADIUS users file.
#
UPSAdmin Auth-Type = Local, Password = "admin"
Service-Type = Administrative-User
UPSDevice Auth-Type = Local, Password = "device"
Service-Type = Login-User
UPSReadOnly Auth-Type = Local, Password = "readonly"