Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
30
Selecting a menu to perform a task
• To do the following, see Switched Rack PDU Settings:
– Configure the overload and low load thresholds for each phase or
bank.
– Configure the Overload Outlet Restriction for each phase or bank.
– Set the Name, Location, and Coldstart Delay for the Rack PDU.
• To do the following, see Outlet Settings for Outlets and Outlet Groups:
– Apply power to and remove power from the outlets.
–Set Power On Delay, Power Off Delay, and Reboot Duration for
the outlets.
– Set the names and associated links for the outlets.
– Create, enable, and use synchronized outlet groups.
• To do the following, see Event-Related Menus:
– Access the event log.
– Configure the actions to be taken based on the severity level of an
event.
– Configure SNMP Trap Receiver settings for sending event-based
traps.
– Define who will receive e-mail notifications and Syslog messages for
events.
– Test e-mail settings.
• To do the following, see Data Menu (Web Interface Only):
– Access the data log.
– Define the log interval (how often data will be sampled and
recorded) for the data log.