Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
58
Secure CoPy (SCP).
To use SCP to retrieve the event.txt file, use the following command:
scp username@hosthame_or_ip_address:event.txt ./event.txt
To use SCP to retrieve the data.txt file, use the following command:
scp username@hosthame_or_ip_address:data.txt ./data.txt
File Transfer Protocol (FTP).
To use FTP to retrieve the event.txt or data.txt file:
1. At a command prompt, type ftp and the IP address of the Switched
Rack PDU, and press
ENTER. If the Port setting for FTP Server in the
Network menu has been changed from its default value (21), you must
use the non-default value in the FTP command. For some FTP clients,
you must use a colon to add the port number to the end of the IP
address. For Windows FTP clients, use the following command
(including spaces):
ftp>open ip_address port_number
2. Use the case-sensitive User Name and Password values for either an
Administrator or a Device Manager User to log on.
– For Administrator, apc is the default for User Name and Password.
– For Device Manager, device is the default for User Name, and apc
is the default for Password.
See Data Menu (Web Interface Only) for information about the
data log.
To use non-default port values to enhance security, see Port
assignments.