Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
148
APC Device IP Configuration Wizard
Purpose and Requirements
Purpose: configure basic TCP/IP settings
You can use the APC Device IP Configuration Wizard to configure the basic
TCP/IP settings (IP address, subnet mask, and default gateway) of the
following:
• Network Management Cards
• Devices that contain embedded Network Management Cards
Using the Wizard, you can configure the basic TCP/IP settings of installed
or embedded Network Management Cards in either of the following ways:
• Automatically discover and configure unconfigured Network
Management Cards remotely over your TCP/IP network.
• Configure or reconfigure a Network Management Card through a direct
connection from the serial port of your computer to the device that
contains the card.
System requirements
The Wizard runs on Windows NT
®
, Windows 2000, Windows 2003, and
Windows XP Intel-based workstations.
The Wizard can discover and configure Network Management
Cards only if they are on the same network segment as the
computer that is running the Wizard.