Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
56
Logged events
By default, any event which causes an SNMP trap will be logged, except for
SNMP authentication failures. Additionally, the Rack PDU will log its
abnormal internal system events. However, you can use the Actions option
in the Web interface’s Events menu to disable the logging of events based
on their assigned severity level, as described in Event Actions (Web
Interface Only).
Web interface
The Log option in the Events menu accesses the event log. This log
displays all of the events that have been recorded since the log was last
deleted, in reverse chronological order. The Delete Log button clears all
events from the log.
Control console
Press CTRL-L to display all the events that have been recorded since the log
was last deleted, in reverse chronological order. Use the
SPACE BAR to
scroll through the recorded events. While viewing the log, type d and press
ENTER to clear all events from the log.
.
Some System (embedded management card) events do not have
a severity level. Even if you disable the event log for all severity
levels, events with no severity level will still be logged.
To access a list of the System (embedded management card) and
Switched Rack PDU (Device) events, see Event List page.
After events are deleted, they cannot be retrieved.