Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
86
An Access option (the Settings option in the control console) enables (by
default) or disables SNMP. When SNMP is enabled, the Access Control
settings allow you to control how each of the four available SNMP channels
is used.
Syslog
By default, the Rack PDU can send messages to up to four Syslog servers
whenever System (embedded management card) and Switched Rack PDU
(Device) events occur. The Syslog servers, which must be specifically
identified by their IP addresses or domain names, record the events in a log
that provides a centralized record of events that occur at network devices.
Syslog settings. Leave the Syslog settings, except the Server IP settings,
set to their defaults unless otherwise specified by the Syslog network or
system administrator.
See also
This user’s guide does not describe Syslog or its configuration
values in detail. For more information about Syslog, see
RFC3164, at www.ietf.org/rfc/rfc3164.
Setting Definition
General Settings
Syslog Enables (by default) or disables the Syslog feature.
Facility Selects the facility code assigned to the Rack PDU’s Syslog messages
(User, by default).
N
OTE: Although several daemon-specific and process-specific
selections are available, along with eight generic selections, User is
the selection that best defines the Syslog messages sent by a Rack
PDU.