Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
107
Tools
Use this option to perform the following actions.
Action Definition
No Action (Web
Interface only)
No change to the Rack PDU.
Reboot Management
Interface
Restarts the user interface of the Rack PDU.
Reset to Defaults Resets all configuration settings. This option will reset the TCP/
IP settings and enable DHCP and BOOTP.
Reset to Defaults
Except TCP/IP
Resets all configuration settings except the TCP/IP settings.
Reset Only TCP/IP
to Defaults
Resets the TCP/IP settings only. This option will not enable
DHCP and BOOTP.
Delete SSH Host
Keys and SSL
Certificates
Removes all host keys you configured for Secure SHell for
encryption-based security at the control console and all
certificates that you configured for Secure Sockets Layer for
authentication at the Web interface.
File Transfer (control
console only)
Allows you to select one of the following to transfer firmware files
to the Switched Rack PDU.
• XMODEM: A terminal-emulation program that you can use only
through a direct serial connection to the Switched Rack PDU.
• FTP: File Transfer Protocol (FTP client application).
• TFTP: Trivial File Transfer Protocol (TFTP client application).
Upload (Web
Interface only)
Upload a user configuration file (.ini file) to the Switched Rack
PDU.
• To create the file, retrieve settings from a configured Switched
Rack PDU. See
How to Export Configuration Settings.
• To upload the file, in the User Configuration File section
specify or browse to the file name, and then click Upload.