Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
91
HTTP/HTTPS Port Configuration
HTTP Port Identifies the TCP/IP port used for communications by HTTP with the
Rack PDU. The default is 80.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 5000 and a
Rack PDU IP address of 159.215.12.114, you would use this
command:
http://159.215.12.114:5000
HTTPS Port Identifies the TCP/IP port used for communications by HTTPS with the
Rack PDU. The default is 443.
You can change the Port setting to the number of any unused port
between 5000 and 32768 to enhance the protection provided by User
Name and Password settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 6502 and a
Rack PDU IP address of 159.215.12.114, you would use this
command:
https://159.215.12.114:6502
Option Description