Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
63
Event Recipients
Overview
The Web interface and control console both have options that allow you to
define up to four trap receivers and up to four e-mail addresses to be used
when an event occurs that has SNMP traps or e-mail enabled.
Trap Receiver settings
To access the Trap Receiver settings that allow you to define which NMSs
will receive traps:
• In the Web interface, use the Recipients option in the Events menu.
• In the control console, use the SNMP option in the Network menu.
See Event Actions (Web Interface Only).
Item Definition
Community Name This setting defines the password (maximum of 15
characters) used when traps are sent to the NMS
identified by the Receiver NMS IP/Domain Name setting.
Receiver NMS IP/Domain
Name
Identifies by IP address or domain name the NMS that will
receive traps. If this setting is 0.0.0.0 (the default value),
traps will not be sent to any NMS.
Generation (Web interface)
Trap Generation (control
console)
Enables (by default) or disables the sending of any traps
to the NMS identified by the Receiver NMS IP/Domain
Name setting.
Authentication Traps Enables or disables the sending of authentication traps to
the NMS identified by the Receiver NMS IP/Domain
Name setting.