Filter
Top Products
®
USER’S GUIDE
Switched Rack PDU
42
Outlet Settings for Outlets and Outlet Groups
How to initiate a control action
Web interface. To control the outlets on your Switched Rack PDU
1. Select Outlets, and then Control on the navigation menu.
2. Mark the check-boxes for each individual outlet or outlet group to
control, or select the All Outlets check-box.
3. Select a Control Action from the list, and click Next >>. On the
confirmation page that explains the action, choose to execute or cancel it.
Control Console. Select Outlet Control/Configuration from the Device
Manager menu to display a list of outlets. For each outlet, the list indicates
whether it is a member of an outlet group.
1. Choose either or the following:
– To control one outlet and the outlet group, if any, to which it belongs,
select the number of the outlet, and then select Control Outlet.
– To control all outlets, select Master Control/Configuration, and
then Control of ALL Outlets.
2. Select a control action.
3. On the confirmation screen that describes the action to be executed,
type Yes at the prompt to perform the action.
If you apply an outlet control action to outlets or outlet groups, the
following delays are used for the action:
• For an individual outlet (not in an outlet group), the action uses
the delay periods and reboot duration configured for that outlet.
• For a global outlet group, the action uses the delay periods
and reboot duration configured for the global outlet.
• For a local outlet group, the action uses the delay periods
configured for the lowest-numbered outlet in the group.