Filter
Top Products
Chapter 14 Working with Network Services 219
Changing DHCP Service Settings
To see a list of available service settings:
$ sudo serveradmin settings dhcp
Also see “DHCP Service Settings” on this page and “DHCP Subnet Settings Array” on
page 220.
To change a single DHCP setting:
$ sudo serveradmin settings dhcp:
setting
=
value
To change several DHCP settings at once:
$ sudo serveradmin settings
dhcp:
setting
=
value
dhcp:
setting
=
value
dhcp:
setting
=
value
[...]
Control-D
DHCP Service Settings
Use the following parameters with the serveradmin tool to change settings for the
DHCP service.
Parameter Description
setting
A DHCP service setting. See table below.
value
An appropriate value for the setting.
Parameter (dhcp:) Description
logging_level "LOW"|"MEDIUM"|"HIGH"
Default = "MEDIUM"
Corresponds to the Log Detail Level pop-up menu
in the Logging pane of DHCP service settings in
the Server Admin application.
subnet_status Default = 0
subnet_defaults:logVerbosity "LOW"|"MEDIUM"|"HIGH"
Default = "MEDIUM"
subnet_defaults:logVerbosityList:_ar
ray_index:
n
Available values for the logVerbosity setting.
Default = "LOW," "MEDIUM," and "HIGH"
subnet_defaults:WINS_node_type Default = "NOT_SET"
subnet_defaults:routers
Default = empty_dictionary
subnet_defaults:selected_port_key
Default = en0
subnet_defaults:selected_port_key_li
st:_array_index:
n
An array of available ports.
subnet_defaults:dhcp_domain_name Default = The last portion of the server’s host
name, for example,
example.com.