Filter
Top Products
Chapter 14 Working with Network Services 229
Changing Firewall Service Settings
To change a setting:
$ sudo serveradmin settings ipfilter:
setting
=
value
To change several settings:
$ sudo serveradmin settings
ipfilter:
setting
=
value
ipfilter:
setting
=
value
ipfilter:
setting
=
value
[...]
Control-D
Firewall Service Settings
Use the following parameters with the serveradmin tool to change settings for the
ipfilter service.
Parameter Description
setting
An ipfilter service setting.
See “Firewall Service Settings” on page 229.
value
An appropriate value for the setting.
Parameter (ipfilter:) Description
ipAddressGroupsWithRules:
_array_id:<group>...
An array of settings describing the services allowed for
specific IP address groups. See “ipfilter Groups with Rules
Array” on page 230.
rules:_array_id:<rule>:... Arrays of rule settings, one array per defined rule. See
“ipfilter Rules Array” on page 233.
logAllDenied Specifies whether to log all denials.
Default =
no
ipAddressGroups:_array_id:
n:address
The address of a defined IP address group, the first
element of an array that defines an IP address group.
ipAddressGroups:_array_id:
n:name
The name of a defined IP address group, the second
element of an array that defines an IP address group.
logAllAllowed Whether to log access allowed by rules.
Default =
no