Filter
Top Products
24
IntraCore 35160-T Basic Port Configuration Menu
Port: [01] Port Name: <none>
1 8 9 16
======== ========
Operating Status: -------- -++---+-
Auto Negotiation: ******** ********
Speed/Duplex: gggggggg ggFgggHg
Port Status: Enabled Link Status: Down (GMII)
Auto-Nego: Enabled Link Speed: N/A
<Cmd> <Description>
h Help for Legends
t Toggle Port Status Enable/Disable
a Enable/Disable Auto-Negotiation
l Set 10M/100M/1000M bps Link Speed
d Toggle Half/Full Duplex
v Advanced Port Configuration
g Global Port Configuration
e Set port name
q Return to previous menu
root>
S)elect port N)ext port P)rev port
To see legends explaining the symbols used for both the Basic and Global Port Configuration Menu settings,
type h. A screen appears, as shown below.
Legends for port status: Legends for port speed & duplex:
X - Absent f - 10 Mbps & full duplex
- - Link down F - 100 Mbps & full duplex
D - Disabled by Mgmt Action h - 10 Mbps & half duplex
d - Disabled by Security Violation H - 100 Mbps & half duplex
B - Blocking G - 1 Gbps & full duplex(fiber)
S - Listening g - 1 Gbps & full
duplex(copper)
R - Learning Legends for port priority:
+ - Forwarding 0 - priority 0 (lowest)
M - Mirror Port 1 - priority 1
2 - priority 2
Legends for Enable/Disable State: 3 - priority 3
- - Disabled 4 - priority 4
* - Enabled 5 - priority 5
6 - priority 6
Legends for Auto-Nego Advertisement: 7 - priority 7 (highest)
A - 100Base-TX full duplex mode Legends for Auto-Negotiation:
B - 100Base-TX half duplex mode * - Enabled
C - 10Base-T full duplex mode C - Disabled, Copper only
D - 10Base-T half duplex mode F - Disabled, Fiber only
Press any key to continue...