Filter
Top Products
45
3.14.7 PING Utility
Type p on the System Utility Menu to enter an IP address to Ping.
IntraCore 35160-T System Utility Menu
<Cmd> <Description>
m Port Mirroring Configuration
o System Clock Configuration
r System Reset Options
l System Log
b Bootstrap Configuration
t TFTP File Transfers
p PING Utility
q Return to previous menu
Enter IP Address (ddd.ddd.ddd.ddd)>
3.15 Statistics
Viewing statistics on a regular basis allows the manager to evaluate the network’s performance. The
manager can view current statistics for the switch on a per-port basis and can change the view of those
statistics and the counters displayed in it. To view statistics, enter the command letter s from the Main Menu
to access the Port Statistics Counters screen. This screen displays the statistic counters for each port. Use
the command letters p, s, or n to select the desired port.
IntraCore 35160-T Port Statistics Counters Port: 1
Elapsed Time Since Up: 007:17:53:31
<Counter Name> <Total> <Avg./s> <Counter Name> <Total> <Avg./s>
Total RX Pkts 0 0 Total RX Bytes 0 0
Good Broadcast 0 0 Good Multicast 0 0
Total TX Pkts 0 0 Total TX Bytes 0 0
TX Unicast 0 0 TX Non-unicast 0 0
Oversize Pkts 0 0 CRCAlign Errors 0 0
Fragments 0 0 FCS Errors 0 0
Collisions 0 0 Late Events 0 0
64-Byte Pkts 0 0 65-127 Pkts 0 0
128-255 Pkts 0 0 256-511 Pkts 0 0
512-1023 Pkts 0 0 1024-1518 Pkts 0 0
<Cmd> <Description> <Cmd> <Description> <Cmd> <Description>
r since reset p prev port n next port
t stop refresh s select port q quit
root>
1. Use the s command to select a port to see the counters, or use n and p to find the port.
2. Type t to stop the periodic updating of the counters, in order to record what they are at that time.
3. Type r to see a display of the same counters, but accrued since the last reset of the counters.
4. Type r in the “since reset” screen to reset the statistics counters in order to see them accrue again
from zero.
5. Type q to quit either statistics screen and return to the Main Menu.