Filter
Top Products
39
3.13.6 Enabling or Disabling the Web Server
The current HTTP Server Status is shown in the User Interface Configuration.
Important! For security, the web server is disabled by default. It cannot be enabled if SSH is currently
enabled. One or the other must be left disabled.
To toggle the status of the HTTP server, type h in the User Interface Configuration Menu.
3.13.7 Access Control
The enhanced switch login process allows for multiple users to access the switch. There are three pre-
defined (default) user names: root (with read-write access), readwrite (with read-write access), and
readonly (with read-only access). Additionally, each user may be assigned their own login password (the
default password for all users is Asante, and it is case-sensitive). Up to eight user names can be assigned,
but only the user name root can add or delete users (see the following screen). Remote root login can be
enabled/disabled in the Access Control Configuration Menu.
To access the Access Control Configuration Menu, enter the letter x from the User Interface Configuration
Menu. Use the listed command letters to configure users, passwords, group membership, and remote login.
IntraCore 35160-T Access Control Configuration Menu
Remote Login: Enable
User Name: Group Membership:
readonly : read-only
readwrite : read-write
<Cmd> <Description>
a Add User
d Delete User
p Change User Password
e Edit User Group Membership
i Group Information
t Toggle Remote Login
q Return to previous menu
root>
3.14 System Utilities
To access the System Utilities Menu, enter the letter s from the Configuration Menu. Use the listed
command letters to configure port mirroring, system clock, system reset options, system log, bootstrap
parameters, TFTP, and PING.
IntraCore 35160-T System Utility Menu
<Cmd> <Description>
m Port Mirroring Configuration
o System Clock Configuration
r System Reset Options
l System Log
b Bootstrap Configuration
t TFTP File Transfers
p PING Utility
q Return to previous menu
root>