Asante Technologies 35160 Switch User Manual


 
81
Appendix B. Features and Specifications
The sections below list the features and product specifications for the IntraCore 35160 Series Gigabit
Ethernet switches.
B.1 Features
The following is a summary of the management features of the 35160 Series switches:
Graphical User Interface: HTML browser-based with password protection for local and remote
management
Command Line Interface: Menu-driven telnet or in-band (via front panel console port)
Front Panel: Graphical representation of unit with real-time network status
General Information: Software version, dual firmware banks. Admin, system, and bootstrap
information. Switch address and system clock
Statistics: User-configurable graph types (bar chart, line chart, table) and counters (since
up, rate, since reset) for RX/TX/Error for each port and unit. Table view also
shows current, peak average, and total packets for each port
Port Configuration: State (forwarding, blocking), status (enabled, disabled), link status (up, down)
and mode (speed, duplex), auto-negotiation, flow control, priority, trunking, and
security. Detailed statistics include TX counters (total frames, total bytes,
dropped frames), RX counters (total frames, total bytes, unicast, non-unicast),
frame counters (multicast, broadcast, by packet sizes), collisions and errors
(undersized, oversized, CRC/alignment, fragments, FCS, late events, total)
Spanning Tree: IEEE 802.1D supported
IEEE 802.1S (Spanning Tree per VLAN) future support
IEEE802.1 W (Rapid Spanning Trees) future support
SNMP: Separate read and write communities, and trap authentication. Four configurable
trap receivers (IP address and community)
Address Table: Per-port counts for MAC and IP addresses. Integrated utilities to sort or search
for specific IP/MAC address. Address table shows unit, port, entry (dynamic,
static, or multiple), IP address, MAC address, and VID
VLAN: Configurable PVID, frame type, and ingress filtering
RMON: Embedded remote monitoring supports four groups (history, statistics, alarms,
and events)
Port Security: IEEE 802.1X port-based network access control (Microsoft Windows XP and
Windows 2000 + SP4 only). Station move detection and duplicate IP address
detection with one (1) trusted address per port
Supported OS: Windows 95/98/Me/NT/2000/XP, Mac OS 9 and higher, and Linux
B.2 Specifications
Connectors: Gigabit Ethernet with Auto-Uplink
(10/100/1000BaseTX): RJ-45 or GBIC holder
for GBIC transceiver module
Console: Serial (RS-232): DB9
Status Indicators: Separate link-activity, speed (10/100/Gigabit) and duplex (full or half) LEDs for
each port; system power, emergency backup power
Physical Characteristics
Dimensions: IC35160-T: 17.5 x 10.0 x 1.8 inches (390 x 220 x 39 mm)
IC35160-G: 17.5 x 10.0 x 2.7 inches (390 x 220 x 58 mm)
Mounting: Install into a standard 19-inch rack (1 RU height) or placed on a desktop;
rackmount kit and rubber feet included