Filter
Top Products
59
untagged frames received by the port are dropped and the source address of the untagged frames is not
learned.
Incoming tagged frames are forwarded to the VLAN whose VID is included in the tag header of the frame.
See “Enabling and Disabling Port Ingress Filtering” in this chapter for more information about the forwarding
and filtering of received tagged frames. To toggle the port between receiving all frames and receiving only
tagged frames, from the VLAN Port Configuration Menu, type e to access the Advanced Configuration
submenu, and then type t.
Setting Port Type
Select the port type. The switch is set at Normal by default.
4.3.5 Displaying a Summary of VLAN Groups
To view a summary of VLAN groups, type v in the Configuration Menu to access the VLAN Management
Menu, then type d to access the VLAN Group Summary. A screen similar to the following appears:
IntraCore 35160-T VLAN Group Summary
+-------+-------------------+-----------+----------------------------------+
|VLAN ID| VLAN Name |Mgmt Access| Port Membership |
+-------+-------------------+-----------+----------------------------------+
1 Default VLAN Enable 1-16
2 test2 Enable 4-8
3 test3 Enable 4-8
4 test4 Enable 4-8
5 test5 Enable 4-8
6 test6 Enable 4-8
7 test7 Enable 4-8
8 test8 Enable 4-8
9 test9 Enable 4-8
10 test10 Enable 4-8
11 test11 Enable 4-8
12 test12 Enable 4-8
13 test13 Enable 4-8
14 test14 Enable 4-8
15 test15 Enable 4-8
16 test16 Enable 4-8
17 test17 Enable 4-8
18 test18 Enable 4-8
S)elect VID Goto V)lan Index Vlan G)rp Menu Vlan Grp I)nfo Menu Q)uit N)ext Page