Filter
Top Products
System IP Configuration
Page 3-3
Changing System Administration Info
To change the name, location, or contact information for the IntraChassis
9000, use the following procedure.
1 Open the System Administration Configuration Menu by
typing a in the Configuration Menu.
2 Type the command letter of the item to be changed in the
System Administration Configuration Menu.
3 Type the information at the prompt.
See Table 3-1 for a description of each parameter.
◆ Note: Each parameter is limited to 64 characters,
including spaces.
To cancel a selected option, press ctrl-c at the command
prompt.
4 Press Return.
The IntraChassis 9000 system administration information
changes take effect.
5 Type q to quit and return to the Configuration menu.
System IP Configuration
This menu displays and allows you to change the information needed to access
the IntraChassis 9000 over the network via in-band management.
To access the System IP Configuration Menu, type i in the Configuration
Menu. A screen similar to Figure 3-2 appears.
GLXY9.book Page 3 Thursday, February 17, 2000 3:04 PM