Filter
Top Products
Basic Configuration
Page 3-52
Changing the Password
Use this option to change the password that the user must enter to log in to the
configuration menu when using either the console or the Web server interface.
▲ Important: The factory default password is Asante. The
password is case-sensitive.
To change the current Local Management Interface or Web-based Interface
password, use the following procedure.
1 Type p in the User Interface Configuration Menu.
2 Type the password you have been using at the prompt.
3 Type a new password at the “Enter Current Password”
prompt.
▲ Important: The password is case-sensitive. The pass-
word can be up to a maximum of 20 characters in
length. The password characters can be any ASCII code.
4 Press Return.
5 Type the new password again at the confirmation password
prompt.
To cancel the change in password, type ctrl-c.
6 Press Return.
The password change takes effect.
7 Type q to return to the Configuration menu.
You will now need to enter the new password each time you log in to the
Configuration menu.
GLXY9.book Page 52 Thursday, February 17, 2000 3:04 PM