Filter
Top Products
Basic Configuration
Page 3-42
Table 3-9 X/Y/Z Modem Image File Downloading settings
Performing a Software Upgrade
Use the following procedure to upgrade the IntraChassis 9000 software through
its serial (console) port.
1 In the Image File Download Configuration menu, type x to
open the X/Y/Z Modem Image File Downloading menu.
2 Type x, y, or z to select the corresponding modem protocol.
◆ Note: For information about these protocols, see the
manual for your communications software.
3 Type c to select the console baud rate. The Baud Rate Set-
ting menu appears, as shown in Figure 3-25. The maximum
baud rate currently supported is 57,600 bps.
Setting Description
Bank 1 Image Version/
Date
The version number and compilation date of runtime code that is
stored in memory Bank 1 on the IntraChassis 9000.
Bank 2 Image Version/
Date
The version number and compilation date of runtime code that is
stored in memory Bank 2 on the IntraChassis 9000.The (Run-
ning) designation indicates that the runtime code is currently run-
ning on this Bank. The same as the image file in the boot bank.
Download Protocol Current setting of the IntraChassis 9000’s serial download proto-
col.
Current Baud Rate Transmission rate for the IntraChassis 9000’s serial port.
Destination Bank Number of the memory bank where the image file will download.
GLXY9.book Page 42 Thursday, February 17, 2000 3:04 PM