Filter
Top Products
SNMP Configuration
Page 3-11
SNMP Configuration
The s option in the Configuration menu displays the SNMP (Simple Network
Management Protocol) Configuration Menu of the IntraChassis 9000, as
shown in Figure 3-5. For further details on using SNMP and RMON for
remote management of your network, see Chapter 5, "Advanced
Management".
This menu allows you to configure the unit’s read and write community strings,
and enable or disable authentication traps. It also allows you to specify which of
your network management stations will receive traps from the IntraChassis
9000.
Figure 3-5 SNMP Configuration menu
IntraChassis 9000 SNMP Configuration Menu
SNMP Read Community: public
SNMP Write Community: private
Authentication Trap: Enabled
SNMP Trap Receivers:
IP Address Community
1. 192.168.54.150 private
2. 192.168.54.110 Sarah
3. <EMPTY> <EMPTY>
4. <EMPTY> <EMPTY>
<Cmd> <Description>
r Set SNMP R
ead Community
w Set SNMP W
rite Communtiy
t T
oggle Trap Authentication Enable/Disable
a A
dd/Update SNMP Trap Receiver
d D
elete SNMP Trap Receiver
q Return to Previous Menu
Command>
GLXY9.book Page 11 Thursday, February 17, 2000 3:04 PM