Filter
Top Products
Basic Configuration
Page 3-14
1 Open the SNMP Configuration Menu by typing n in the
Configuration Menu.
2 Type d to Delete a Trap Receiver. A prompt for the entry
of the trap receiver appears.
3 Enter the number of the entry you want to delete (1,2,3, or
4) and press Return.
The trap receiver is deleted from the SNMP Trap Receivers list.
Port Configuration
This menu allows you to configure manually each of the IntraChassis 9000’s
ports for port speed, duplex, and auto-negotiation.
It also provides an overview of the entire IntraChassis 9000 system’s port
operating status.
To access the Port Configuration Menu, type p in the Configuration Menu. A
screen similar to Figure 3-6 appears.
Figure 3-6 System module map screen
Choose the module for which you want see a port configuration menu. If, for
example, you chose slot 1, you would see a screen similar to Figure 3-7.
System Module Map
=================
Please select one of the following slots
Slot Description (Module Type)
---- --------------------------------------
1 24 10/100BaseTX ports Module (24-100TX)
2 2 1000BaseX ports Module (2-GBIC)
3 24 10/100BaseTX ports Module (24-100TX)
4 2 1000BaseX ports Module (2-GBIC)
5 <none>
6 <none>
7 <none>
8 <none>
9 <none>
Enter Module Number (1-8)>
GLXY9.book Page 14 Thursday, February 17, 2000 3:04 PM