Basic Configuration
Page 3-46
Viewing the System Log
The IntraChassis 9000 System Log records and displays any major system
events on the switch, such as fatal errors, plugging in or removing a module, etc.
To view the system log, use the following procedure.
1 Type l in the Configuration menu. the System Log menu
appears, as shown in Figure 3-27.
Figure 3-27 System Log menu
2 Type d to display the current system log, as shown in
Figure 3-28.
Figure 3-28 System Log Display
The system log displays any major system events that have
occurred on the IntraChassis 9000. If no major events have
occurred, “System up” messages are displayed.
◆ Note: The system Log holds a maximum of 64 entries.
3 Press any key to display the next page of System Log infor-
mation.
IntraChassis 9000 System Log Menu
<Cmd> <Description>
l Display System L
og
c C
lear System Log
q Return to previous menu
Command>
IntraChassis 9000 System Log Summary
====================================================================
No. D: H: M: S Event
1. 000:00:00:00 Reset NVDB sections to factory default
2. 000:00:00:07 Spanning Tree Task Disabled
3. 000:00:32:53 Spanning Tree Task Enabled
4. 000:00:33:45 Spanning Tree Task Disabled
5. 000:00:41:11 Spanning Tree Task Enabled
6. 000:00:00:00 Reset NVDB section 0 to factory default
7. 000:00:32:51 Spanning Tree Task Disabled
8. 000:00:33:08 Spanning Tree Task Enabled
Q
uit Next Page
GLXY9.book Page 46 Thursday, February 17, 2000 3:04 PM