Filter
Top Products
User Interface Configuration
Page 3-51
Setting Console Idle Time-out Period
Use the following procedure to set the Console Idle Time-out.
1 Type c in the User Interface Configuration Menu.
A prompt for the number of minutes is displayed.
2 Enter the Idle Time-out in minutes at the prompt.
◆ Note: The default time-out is 5 minutes. Range for
time-out is 0-60 minutes (0 indicates no time-out).
To exit without making any changes, press ctrl-c.
3 Press Return.
The change of the Console Idle Time-out period is reflected in the User
Interface Configuration menu.
Setting Telnet Idle Time-out Period
Use the following procedure to change the Telnet Time-out.
1 Type t in the User Interface Configuration Menu.
A prompt for the number of minutes is displayed.
2 Enter the Idle Time-out in minutes at the prompt.
◆ Note: The default time-out is 5 minutes. Range for
time-out is 1-60. To exit without changes, press ctrl-c.
3 Press Return.
The change of the Telnet Idle Time-out period is reflected in the User Interface
Configuration menu.
After you have configured the desired time-outs, type q to return to the
previous menu.
GLXY9.book Page 51 Thursday, February 17, 2000 3:04 PM