Filter
Top Products
QLS-4100 X 29
Loading Label or Tag Media
The QLS-4100 X is capable of printing on a wide variety of media types and sizes
and is designed to accept media up to a 12” OD (outside diameter) roll capacity
on a 3” ID (inside diameter) core.
The QLS-4100 X positions the printed image correctly by utilizing either a trans-
missive or reflective sensor to detect the begining of a label or tag. In some
applications a continuous media without notches or reflective marks can be used,
and the length of the printed image is dictated by software.
When using the transmissive method of sensing, the media should have at least
a 0.125” (3 mm) gap or notch. When using a reflective sensing method, the
media should have a 0.078” (2 mm) solid black reflective mark on the back that
extends a minimum of 0.5” (12 mm) from the inside edge of the media.
As an aid, a threading diagram showing the media path is printed on the center
plate of the printer.
To Load Label or Tag Media:
Lift the printer’s cover.
Flip each Print Station Lift Lever counterclockwise to open the printheads.
1
2