Filter
Top Products
QLS-4100 X 66
Powering the Printer On
When you turn on your printer, it will execute an initialization procedure and self-
test. During this process, the display will indicate the model number, firmware
version, and memory check status of the printer.
The first display will show the model of the controller, QLS-4100(S) in this ex-
ample, followed by the version number of boot software. The boot software per-
mits the printer to initialize, perform a selftest and load system firmware. The
second line of the display will cycle through memory check.
The second display will show the printer model, QLS-4100 X, followed by the
system firmware version number. Periodically, QuickLabel Systems may provide
upgraded firmware to add functionality to the printer. You may visit QuickLabel
Systems’ website to check for updated firmware.
Under normal conditions, the printer will then display:
followed by:
indicating that the printer is ready to accept data and print labels.
Printing with the QLS-4100 X
QLS-4100(S) v: 1.0
Memory Test (16M)
QLS-4100X v: 1.1
Initializing...
Selftest Complete
Ready
4100X v1.1