Filter
Top Products
QLS-4100 X 81
Printing Labels
To print labels, you need to send a label from QuickLabel Systems’ Color
QuickLabel
®
99 Pro software program, or from a 3rd party application via the
QuickLabel Systems Windows Printer Driver. Refer to the Appendix D and E of
this manual for basic instructions in setting up the software.
Before sending a label to the QLS-4100 X
Make sure that the QLS-4100 X is in a Ready state. Press the PRINT/PAUSE
pushbutton if necessary until Ready is displayed.
Specify the label quantity from within your software application.
Send the label you wish to print from your software application. The QLS-4100 X
will begin printing the label.
Use the printer menus to change any parameters may need adjustment.
The following settings can be adjusted while printing:
• Speed
• Intensity
• Print Offset
• Counter
• Cut Offset
• Print Line Adj.(ustment)
Note
It is recommended that these settings be changed in Color QuickLabel 99
software or the QLS Windows Printer Driver as these would override any
settings made through the printer control panel.
Press the PRINT/PAUSE key as necessary to pause or resume printing. The printer
will continue to print until the specified number of labels have been printed.
Note
When the QLS-4100 X is paused during the course of printing a batch of
labels, a small white horizontal line will appear across the labels in the
location of the printheads. This is a normal result of interrupting the
print operation. It is recommended that you limit the use of the Pause
function while printing.
1
2
3
4
5