Filter
Top Products
QLS-4100 X 38
Calibrating Continuous Media
Press the PRINT/PAUSE key until the printer display shows Pause on the display.
Press PREV or NEXT key until the Calibrate menu is displayed.
Press the + or - key until Continuous is displayed.
Press the SELECT key. The printer will feed a short length of media and will then
be calibrated for continuos media. The display will show the following prompt:
Press the PRINT/PAUSE key to return the printer to a Ready state.
Calibrating Inverted Gap Media
Some examples of inverted gap media include clear labels with an opaque liner,
a material which has sensing marks on the label itself, or a material on which you
must sense on a preprinted image.
When using media of this type, the printer is calibrated using the Gap Calibration
method outlined previously in this chapter.
The only difference in the procedure is that you would align the sensing mark
when the printer prompts for placement of the liner or gap.
1
2
3
4
5
Pause: Calibrate
Continuous *
Pause: CONTINUOUS
Media Calibrated