Filter
Top Products
QLS-4100 X 59
Factory Reset
The factory reset feature of the QLS-4100 X returns all parameters available through
the printer’s front panel to their factory default values. Use the procedure below to
perform a factory reset.
Press the PRINT/PAUSE key until the printer is in the paused state.
Press the NEXT or PREVIOUS key until the Factory Reset menu is displayed.
Press the SELECT key. The following message will be displayed to confirm be-
fore resetting.
Press the SELECT key to reset the following parameters to the factory default
values.
Note
It is recommended that QLS Settings be printed before performing a
factory reset to aid in restoring color realignment at a later time.
Factory Default Values
Calibrate Continuous
Speed 3 in/sec
Intensity (heads 1 - 4) 16
Print Offset 0
Counter Off
Mirror Mode Off
Cut Flag Off
Cut Offset 0
Print Line Adj. (heads 1 - 3) 0
Cross Web Adj. (heads 1 - 4) 0
System Baseline 0
TTR Drop 22
1
2
3
4
Pause: Factory Reset
Press SELECT
Resets all settings
SELECT to confirm