Filter
Top Products
Section 9
Accessories and Options
Accessories & Options 9-1MN1851
Cables Shielded (Screened) cable provides EMI / RFI shielding and are required for
compliance to CE regulations. All connectors and other components used must
be compatible with this shielded cable.
Connectors
Mating Connector by connector number (for spare parts)
X1 – #ASR29714 (9 pin, Female) Phoenix Part No. MVSTBW2,5/9–ST
X1 – #ASR29715 (2 pin, Female) Phoenix Part No. MVSTBW2,5/2–ST
X3 – #ASR16000 (20 pin, Female) Phoenix Part No. MVSTBR2,5/20–ST
X6 – #ASR16215 (9 pin, Male)
X7 – #ASR16215 (9 pin, Male)
X8 – #ASR23345 (9 pin, Female)
X9 – #ASR25828A (15 pin, Male)
EMC AC Mains Filter AC filters remove high frequency noise to protect the control. These filters
also prevent high frequency signals from being transmitted back onto the power
lines and help meet CE requirements. To select the proper filter, you must know
the voltage and current used by the drive and the impedance of the AC line.
For package size A, B and C (Model T – 1 Phase)
Filter Type Rated Volts
Rated
Amps
@ 40°C
Leakage
Current mA
Weight
lbs (kg)
Baldor No.
FN 2070 - 12 250 12 0.4 1.61 (0.73) 30548
For package size E, G and H (Model S – 3 Phase)
Filter Type Rated Volts
Rated
Amps
@ 40°C
Leakage
Current mA
Power
Losses
Watts
Weight
lbs (kg)
Baldor No.
FN 351 - 8 - 29 440 8 16 8.0 3.97 (1.8) ASR24667
FN 351 - 16 - 29 440 16 16 9.0 3.97 (1.8) ASR24668
FN 351 - 25 - 33 440 25 170 9.0 6.61 (3.0) ASR24669
FN 351 - 36 - 33 440 36 170 10.5 6.61 (3.0) ASR24670
FN 351 - 50 - 33 440 50 190 12.5 6.83 (3.1) ASR24671
For package size E, G and H (Model T – 3 Phase Required for LP4xx)
Filter Type Rated Volts
Rated
Amps
@ 40°C
Leakage
Current mA
Weight
lbs (kg)
Baldor No.
FN 3258 - 30 - 47 480 30 184.7 2.64 (1.2) ASR30521
FN 3258 - 7 - 45 480 7 172.4 0.11 (0.5) ASR30522