Filter
Top Products
Accessories & Options 9-3MN1851
Regeneration Resistor
A regeneration resistor should be installed to dissipate energy during braking if a
Fault “1” (over-voltage) occurs.
Baldor Catalog Number
Control
115VAC Controls 230VAC Controls 400/460VAC Controls
Control
Rated
Amps
Package
Size
Resistor
Catalog
No.
Resistor
Watts
Resistor
Catalog
No.
Resistor
Watts
Resistor
Catalog
No.
Resistor
Watts
2.5 A RG27 44 RG56 44
5 B RG27 44 RG56 44
7.5 C RG22 100 RG39 100
2.5 G * RG68 320
5 G * RG68 320
7.5 G RG68 320
15 H RG27A 320
22.5 H RG23 640
2 E RG4.7 320 RG10 320
5 E RG4.7 320 RG10 320
10 E RG4.7 320 RG10 320
15 E RG4.7 320 RG10 320
* These controls have a 200 ohm, 50 watt resistor installed (internal).
An RG68 resistor can be installed in parallel for additional capability.
3.54
(90)
5.5 (140) for 44 watt
8.9 (228) for 100 watt
13.2 (337) for 320/640 watt
3.9
(100)
M4
2.6 (65)
1.7 (45)
L
L =
Clearance Requirements (all sizes):
2″ (51mm) top and bottom
1″ (26mm) left and right side
For safe operation, allow a clearance distance between each control and on all sides of each control.