Filter
Top Products
6-4 BE-1204B-BC • BE-1206B-BC
Chapter 6 Embroidering
Settings menu
Needle
Uses the same needle bar for all embroidering. (→ page 6-25)
Same Speed Range
Sets the head. (→ page 6-26)
Pause Sets whether to stop the needle bars temporarily when changing all the
needle bars. (→ page 6-26)
Speed Range
Defines the speed range. (→ page 6-27)
Head Operation Suspend Cancels the head operation which is not halted on the machine side.
(→ page 6-27)
Hoop Feed Position
Sets the hoop feed position. (→ page 6-28)
Embroidery Area
Sets the area for embroidering. (→ page 6-29)
Embroidery Hoop
Sets the type of embroidery hoop. (→ page 6-29)
Thread Trimming
Sets the inching and thread removal amount. (→ page 6-31)
Thread Breakage Sensor
Sets operation of thread breakage sensor. (→ page 6-32)
Automatic Step Back
Sets automatic step back count for thread breakage. (→ page 6-33)
Automatic Hoop Feed Feeds hoop to the hoop feed position automatically after embroidering.
(→ page 6-33)
End of embroidery
Sets if the machine returns to the start point after end of embroidery.
(→ page 6-34)
Mending
Sets details of mending. (→ page 6-35)
Adjust
Sets the adjusting value. (→ page 6-36)
Driving shaft
Set the startup speed of the main shaft. (→ page 6-37)
Activate escape with pause Sets whether to feed the hoop during temporary stop of the needle bars
to change colors. (→ page 6-37)
Short stitch speed reduction
Reduces speed when stitching in a designated small pitch. (→ page 6-
38)
Thin / Thick material
Adjusts the timing of needle drop and hoop movement. (→ page 6-39)
Area trace Select the outside shape of area tracing before starting sewing.
(→ page 6-40)
Trace with needle No.1
Perform the area tracing using the needle bar No. 1. (→ page 6-40)
Default Settings Resets changes of the machine setting to the default at the factory
shipment. (→ page 6-41)
Show Setting
Shows the contents of settings. (→ page 6-42)
Load Setting
Loads the setting details. (→ page 6-44)
Save Setting
Saves the changed setting. (→ page 6-45)
Load Hoop
Selects the hoop type. (→ page 6-46)
Window menu
Cascade
Cascades windows. (→ page 6-20)
Tile
Tiles windows. (→ page 6-20)
Arrange Icons
Align icons. (→ page 6-22)