Filter
Top Products
BE-1204B-BC • BE-1206B-BC 6-41
Chapter 6 Embroidering
Default Settings
Resets changes of the machine setting to the default.
! Items for setting and initialization are as follows:
Speed Range Automatically selects the value suitable for the hoop type.
Head Operation Suspend Cancels the head operation which is not set for rest on the machine.
Hoop Feed Position Returns to the machine home position.
Embroidering Area Sets the size each for the selected hoop.
Thread Trimming
Inching motion
Thread removal feed length
Thread remaining amount
Yes
15 mm (0.6 inch)
5
Thread Breakage Sensor
All sensors are on.
Sensitivity 10
Automatic Step Back 0
Thread Breakage
Sensor Sensitivity
Not affected by the thread breakage sensor sensitivity
Automatic Feed Hoop No
Return to the start point Yes
Mending Automatically rest breakage error
Automatically reset the rotary hook thread entanglement error
Raise the presser foot when resetting the thread trimming error
Stop the machine at the mending end position
Stitches before mending
Trim during stop in mending setting
Conduct lock stitch when trimming thread
No
No
Yes
Yes
1 stitch
No
No
Adjustment 0.0 mm for X direction
0.0 mm for Y direction
Main shaft speed up setting
Activating speed up of driving shaft
Low speed stitches
No
3
Hoop feed during temporary
stop
No
Reducing speed in a small
pitch
No
Thin / Thick material 110 degrees (100 degrees for cap frame)
Area Trace "8 corner" is selected.
Trace with needle No.1 Yes