Filter
Top Products
2-12 BE-1204B-BC • BE-1206B-BC
Chapter 2 Preparation of Embroidery Machine
2-7 Connection of Personal Computer to Machines (for connecting 4 sets)
Be sure to ground the personal computer.
W1352Q
1. Turn off the power of the personal computer and the machine.
2. Open the cover of the personal computer and insert an interface board into the slot for the PCI
bus.
3. Connect the interface board male connector and the personal computer RS-232C connector
(COM1 or RS-232C-1) using the attached short RS cable.
4. Remove the side cover of the control box.
Interface board
CAUTION
Before insertin
g
or removin
g
IF cables or RS
cables, turn off the power switches of the
machine, the computer, and peripheral
equipment.
IF cable
RC
cable
IF cable
Terminator
(Be sure to attach
a terminator.)
(4th machine)
(3rd machine)
(2nd machine)
(1st machine)
Control box