Filter
Top Products
BE-1204B-BC • BE-1206B-BC 7-5
Chapter 7 Operation of Machine
4. Measures against Thread Breakage
4-1 Remedies
W1258Q
1. If embroidering is suspended due to thread breakage, the Thread tension base lamp of the
machine head blinks in red.
2. Correct the broken thread and pass it through again.
Refer to "Chapter 2, 3-1 Upper Threading" (→ Page 2-17) for details.
3. Press the switch or press the STEP BACK/FWD switch at machine head in order to reset the
alarm.
4. Return the hoop to a position where thread breakage occurred by pressing the STEP BACK
switch.
or
W1271Q
When the switch is pressed for 5 stitches or more, the machine continues operation without holding the
switch. To stop the machine, press the switch to the opposite side.
5. Press the switch on the operation panel or the start switch located between the machine
heads to resume operation.
W1270Q
Thread tension stand switch
Thread tension stand lamp