Filter
Top Products
9-4 BE-1204B-BC • BE-1204C-BC • BE-1206B-BC
Chapter 9 Maintenance
2. Oiling
Supply oil to the following places at regular intervals.
• When oiling, be sure to supply Brother’s specified oil (Nippon Oil, Embroidery Lube 10N; VG10) using
the dropper.
* If this type of lubricating oil is difficult to obtain, the recommended oil to use is <Exxon Mobil Essotex
SM10; VG10>.
• Excessive oiling may cause the material to be stained.
• Be sure to wipe off excessive oils with waste cloth etc.
2-1 Head
! Supply one or two drops of oil to each needle bar from the oil supply hole of the lower cover daily.
W1221Q
! Lubricate the felt on the top surface of the head once a week.
W1291Q
Felt