Brother BE-1204C-BC All in One Printer User Manual


 
12-8 BE-1204B-BC • BE-1206B-BC
Chapter 12 Troubleshooting
Personal Computer Section
Trouble Check Point
! The power lamp does not light up
when the computer power switch is
turned on.
Is the cable correctly plugged in the
computer?
Is the AC line live?
! The display does not light up when the
computer power switch is turned on.
Is the display power lamp on?
Is the display's cable correctly connected?
Is the display's contrast correctly adjusted?
! "Windows" cannot be started. Is a floppy disk inserted?
! "Windows" can be started but the
embroidery software cannot.
Is the selection of other icons possible?
Is the selected icon correct?
Can you double-click more quickly?
! The window does not open though the
machine power is turned on?
Is the cable to the machine and the
interface board correctly connected?
Is the interface board attached
properly?(Refer to Page 2-12.)
Is the correct COM port selected?(Refer to
Page 6-7.)
! The screen changes when the mouse
is not operated for a while.
The screen saver is preset.Invalidate this
function on the control panel screen.Do not
validate the power-saving function.
! The screen of the editor,the explorer or
the production report disappears
during operation.
The machine controller screen was clicked
so that the current screen is hidden behind
it.Move the mouse to the bottom of the
screen and select the program
(editor,explorer,or production report).
Check these points once again
! Colors set for a design and threads are
not available.
The number of colors is set to 256.Increase
the number to 65000 or more on the control
panel screen.