Filter
Top Products
BE-1204B-BC • BE-1204C-BC • BE-1206B-BC 2-9
Chapter 2 Preparation of Embroidery Machine
!
!!
! For embroidering with flat hoop/sash frame (upper position)
W1228Q
1. Attach four hexagon socket head cap screws to each of table parts R [1], M [2](BE-1206B and
BE-1204C only), and L [3] from the back.
2. Insert the table backing plate [4] of each table into the table backing rubber on the table support
Middle [5].
3. Adjust the height of the table support Front [6] to be even with the upper surface of the bed.
4. Tighten all hexagon socket head cap screws firmly.
5. Attach four (three in BE-1204B) thumb bolts to the lower front steel pipe of the leg section.
Fasten the table and the leg section using table stays (4 pcs(3 pcs in BE-1204B)) [7].
[2]
[3]
[7]
[6]
[4]
[5]
[1]