Filter
Top Products
2-22 BE-1204B-BC • BE-1204C-BC • BE-1206B-BC
Chapter 2 Preparation of Embroidery Machine
3-4 Attachment of Embroidery Hoop and Frame
!
!!
! Tubular square hoop
BE-1204B,BE-1206B
1. Loosen the thumb bolt M6 [1] to draw it to the
center.
2. Align the positioning hole on the tubular
round arm frame [4] with the positioning pin
[3] (S58665) on the X-feed sash [5] (S58650),
and fit the tubular round arm fixing nut [2] on
the back side of the thumb bolt M6 [1] into the
hole on the X-feed sash.
3. While keeping the nut in the hole, slide the
thumb bolt M6 toward the edge and tighten it
firmly at the outermost point.
BE-1204C
The frame is fixed to the position of (1) for 360
pitch, so is to (2) for 400 pitch and to (3) for
500 pitch.
1. The tublar round arm frame R [4] is fixed with
the thumb bolt [5] to the connecting plate [6]
to align with each pitch. At the same time, put
the positioning pin [7] into a hole at the center
of the tublar round arm frame R [4].
2. Insert the grooves of the tublar round arm
frame L [8] and R [4] onto the thumb bolt M6
[10] on the X-feed sash [9] so as to align with
each pitch and fix them.
W1243Q
[1]
[4]
[2]
[5]
[2]
[3]
2843M
2844M