Canon 2237B008 All in One Printer User Manual


 
Sending Documents
4‑72
5
If you select a one‑touch button already
storing a destination, skip this step.
6
Enter the recipient’s fax number (up to 120
characters) using (numeric keys), ,
and .
[Pause]: Press to insert a pause of several
seconds in the fax number you are
dialing. If you insert a pause within the
fax number, the letter <p> is displayed
between the numbers. If you insert a
pause at the end of the fax number, the
letter <P> appears. When dialing an
overseas number, insert a pause after the
country code, and at the end of the fax
number. (See “Pause Time,” on p. 12‑15.)
[Tone]: Press when you want to directly
call an extension line that is connected to
a PBX (Private Branch Exchange), which
accepts only tone signals. If you press
[Tone], the letter <T> appears.
[] []: Press to move the position of the
cursor.
[Backspace]: Press to delete the number
or character immediately to the left of the
cursor.
[Space]: Press to insert a space between
numbers.
You cannot insert a pause or a space at the
beginning of a number.
If you enter a pause at the end of the
number, the pause is always 10 seconds
long.
You can press (Clear) to clear your entry.
Press [Option] or [Next].
If you want to specify the sending speed,
type of call, and ECM TX settings, press
[Option] and proceed to step 7.
Otherwise, press [Next] and skip to
step 15.
7
8
Select the desired sending speed.
Press [OK].
If your document transmissions are slow in
starting, this may mean that the telephone
lines in your area are in poor condition. Select
a slower speed. You can select [33600 bps],
[14400 bps], [9600 bps], or [4800 bps].