Canon 2237B008 All in One Printer User Manual


 
4‑85
Sending Documents
Erasing One-Touch Buttons
1 Press (Additional Functions).
2
If a password has been set for the
Address Book, enter the password using
(numeric keys), then press [OK] to
enter the Address Book Settings menu. (See
Chapter 8, “System Settings,” in the Reference
Guide.)
3
4
Select a one‑touch button containing the
destination(s) you want to erase.
Press [Erase].
If the desired one‑touch button is not
displayed, press [] or [] to scroll to the
desired one‑touch button.
You can also specify the one‑touch
button’s number by entering the three
digit number of the desired one‑touch
button using (numeric keys).
Make sure that you verify the settings first
before you erase them.
One‑touch buttons that already have
destinations stored in them are displayed
with a black square () in the lower right
corner of the key.
If you select a one‑touch button that
already has destinations stored in it, the
destinations are displayed.
If you register multiple destinations as a
group address in a one‑touch button, the
number of destinations registered in the
group address is displayed.
5
To cancel erasing, press [No].
The message <Erased.> appears for
approximately two seconds on the touch
panel display.
6 Press [Done] repeatedly until
the Send Basic Features screen
appears.