Filter
Top Products
1‑3
Before Using the Machine
Feeder
A Feeder Cover
Open this cover to remove jammed originals.
B Slide Guides
Adjust the slide guides to match the width of
the original.
C Original Supply Tray
Originals placed here are automatically fed
sheet by sheet to the scanning area of the
platen glass. Place originals into this tray with
the surface that you want to scan face up.
D Original Output Area
Originals that have been scanned from the
original supply tray are output to the original
output area in the order that they are fed into
the feeder.
Do not insert your fingers into the gaps around the
original supply tray, as your fingers may get caught.
Also, be careful not to drop objects, such as paper
clips into the gaps, as doing so may cause damage
to the machine or cause it to break down.
When using the platen glass to copy or scan thick
originals, such as books or magazines, do not press
down hard on the feeder.
If the original output area is blocked, originals may
get damaged, and printing may not be performed
correctly. Therefore, do not place any objects in the
original output area.
–
–
–