Filter
Top Products
11‑23
Troubleshooting
Error Code Description Action
#0059 Your transmission is canceled
because the number you dialed was
different from the number registered
on the other party’s fax machine.
Check to see that the correct fax
number is registered on the other
party’s fax machine.
#0701 The specified Department ID does not
exist, or the password has changed.
Enter the correct Department ID or
password using – (numeric keys),
and try again. (See “Department/User
ID Management,” on p. 1‑17.)
#0703
(for the
imageCLASS
MF7480 only)
The memory for image data is full
when sending color documents.
Wait a few moments, and then try
sending again after other send jobs
are complete.
Erase documents stored in
memory. If the machine still does
not operate normally, turn the
main power off, and then back on.
–
–
#0705
(for the
imageCLASS
MF7480 only)
The send operation was interrupted
because the size of the image
data is larger than that specified in
Maximum TX Data Size set in E‑mail/
I‑Fax Settings in Communications
Settings in System Settings (from the
Additional Functions screen).
Change the setting for the
Maximum TX Data Size in E‑mail/
I‑Fax Settings in Communications
Settings in System Settings (from
the Additional Functions screen).
Select a lower resolution.
If you are using I‑fax, decrease
the number of pages containing
images that you are sending each
time, so that you do not exceed the
Maximum TX Data Size.
Set Divide into Pages to [On] in the
File Format screen.
–
–
–
–
#0749 You could not execute the job
because a service call message is
being displayed.
Turn the main power off, wait for 10
seconds, and turn the main power
back on. If the machine still does not
work normally, turn the main power
off, disconnect the machine, and
contact Canon Authorized Service
Facilities or the Canon Customer Care
Center.
# 0751
(for the
imageCLASS
MF7480 only)
The server is not functioning. The
network is down (the server is unable
to connect to the network or was
disconnected).
Check the recipient’s address.
Check that the network is up.
–
–