Canon 2237B008 All in One Printer User Manual


 
12‑21
Machine Settings
Printer Settings
1. IMAGE REFINEMENT Sets whether to print smoothly the jagged outlines of
characters and graphics.
ON
OFF
The results of image refinement may be different depending on the
types of characters and graphics you want to print.
2. DENSITY Adjusts the print density. (1‑9)
3. TONER SAVER
Sets whether the toner saving mode is enabled.
OFF
ON
If [ON] is selected for Toner Saver, very light or finely detailed
images may not be printed clearly.
6. PAGE LAYOUT
Sets the printing layout.
1. BINDING Sets the binding position for two‑sided printing.
LONG EDGE
SHORT EDGE
You cannot create a binding margin with this setting alone. Use
this setting in combination with the Margin setting to create a
binding margin.
For two‑sided printing, the orientation of the image on the back
side of the page may be changed by this setting.
2. MARGIN Sets the page margin in inches or millimeters.
INCHES (‑01.90INCHES–01.90INCHES)
mm (‑50.0 mm–50.0 mm)
If this setting moves the image outside the printable area, part of
the image may be cut off.
Pressing [] increases the setting value by 0.01" (0.5 mm) each
time the key is pressed. Pressing [] decreases the value by 0.01"
(0.5 mm) each time. Holding down either [
] or [] continuously
speeds up the value alteration.