Filter
Top Products
Chapter 11 Troubleshooting 134
Scanned image is displayed large (small) on the
computer screen
zThe image is displayed large (small) in the application.
Enlarge or reduce the image display in the application.
zThe resolution is too high or too low.
The image will be large if resolution is high. It will be small if resolution is low.
Set the resolution as necessary. (See Software Guide.)
When the [Alarm] lamp flashes
If a paper jam occurs while printing, the [Alarm] lamp flashes. Check the cause of the error below
and take corrective actions.
z If a message appears:
1 Check the message appearing on the LCD.
2 Follow the instructions and correct the error.
• For LCD messages, see page 135.
3 Press [OK/Set] to resume operation.
• The [Alarm] lamp will stop flashing.
• If the error remains, turn OFF the machine and disconnect the power cord. Wait at least 15 seconds
then reconnect the power cord and turn ON the machine.
z If a message does not appear:
1 Turn OFF the machine and disconnect the power cord.
2 Wait at least five seconds, reconnect the power cord and turn the power ON.
• If the problem has been resolved, the [Alarm] lamp will stop flashing.
z If the [Alarm] lamp still flashes even after you have turned the power ON again:
Contact your local authorised Canon dealer or the Canon help line.