Filter
Top Products
III
z Others
• This product emits low level magnetic flux. If you use a cardiac pacemaker and feel
abnormalities, please move away from this product and consult your doctor.
• When setting the machine near electric products with fluorescent lighting, separate the machine
at least 5 7/8 inches (150 mm) from electric products equipped with fluorescent lighting. If you
place it near to them, the machine may malfunction as a result of the noise emitted by the
fluorescent lighting.
• When turning the power OFF, be sure to press [ON/OFF] and confirm that the [Alarm] lamp has
extinguished. If you pull the power plug out of the wall outlet while the [Alarm] lamp is lit or
flashing, the print head is not protected, and you may not be able to print later.
CAUTION
You may cause injury or damage the machine if you ignore any of these safety precautions.
z Location
• Do not place the following objects on top of the machine. If such objects come into contact with
internal electrical components, the machine may short-circuit, resulting in fire or electrical shock.
–Metal objects such as jewelry and watches
–Containers of water or other liquids such as glasses, vases, or pot plants
If water does spill inside the machine, turn OFF the power immediately by pressing the [ON/OFF]
key, and disconnect the power cord. Then contact your local authorized Canon dealer or the
Canon help line.
• Do not block or cover the ventilation port or any openings on the machine with objects, as it may
cause the inside of machine to overheat and cause a fire.
• Place the machine on a flat, stable, vibration-free surface that is strong enough to support its
weight. If the machine topples over, it may result in injury.
• Do not use or store the machine outdoors.
• Do not install the machine near devices that contain magnets or generate magnetic fields, such as
speakers.
• To ensure proper ventilation, make sure the machine is approximately 4 inches (100 mm) away
from walls and other equipment.